詳細介紹：
美孚OGL007|Mobilgear OGL007|開式齒輪潤滑脂
產品說明： 美孚OGL007開式齒輪潤滑脂是一種高性能的采用先進技術的潤滑劑，它融合了極壓添加劑和承受重載的石墨。
美孚開式齒輪潤滑脂包含了美孚OGL007,009和461。
產品特性：
1.提供杰出的重載性能，
2.高黏附性，在極端工況下抗“拋摔”。
3.的柔軟的稠度和低溫特性，能適應寬粘度范圍的噴射操作。
4.優良的質量和精細的分散石墨，這些對于處于邊界潤滑狀態的齒輪，特別是在重載低速的典型大開始車輪具有良好的保護作用。
產品應用：
美孚OGL007開式齒輪潤滑脂主要用于大型、慢速和中速、重負荷齒輪的潤滑。專門為大型、低速和中速、重載的齒輪提供有效潤滑而設計。采礦工業，包括在高溫環境下運行，例如，水泥爐窖和球磨機上的環形齒輪。鋼鐵，水泥，造紙和化學領域。
美孚齒輪OGL007,009能為齒輪提供便利的噴射潤滑，美孚齒輪OGL461也適用于新安裝的開式齒輪在初次運行狀態下表面的潤滑。
Mobilgear OGL 007, 009 and 461 are high performance advanced technology lubricants which incorporate both extreme pressure additives and finely dispersed graphite for load carrying. They are intended primarily for the lubrication of large, slow to medium speed, heavily loaded gears. In addition to providing outstanding load carrying, they are formulated to have excellent adhesion and resistance to "fling-off" under extreme conditions.Mobilgear OGL 007, 009 and 461 are easily pumped from drums to application spray nozzles with conventional transfer pumps.The soft consistency and the low temperature properties of Mobilgear OGL 007, 009 and 461 are suited to spray applications operating under a wide variety of conditions. Mobilgear OGL 007, 009 and 461 are formulated with a carefully specified quality of finely dispersed graphite which contributes significantly to wear prevention under the boundary lubrication conditions found in the high load / slow speed operations typical of large open gearing.
Mobilgear OGL 007, 009 and 461 are leading members of the Mobilgear brand of products that enjoy a worldwide reputation for performance and innovation. Developed by ExxonMobil research scientists and backed by a worldwide technical support staff, Mobilgear OGL 007, 009 and 461 have provided excellent protection and performance in large open gearing in a wide variety of industrial applications.Mobilgear OGL 007, 009 and 461 were developed to meet the requirements of Original Equipment Manufacturers (OEMs) and the needs of customers who prefer to use a soft to semi-fluid grease for heavily loaded, slow to medium speed open gearing. A critical need for products of this type is to separate the heavily loaded gear teeth and avoid surface wear and damage. Mobilgear OGL 007, 009 and 461 are formulated with a specific quality of finely dispersed graphite which has been shown by our researchers to contribute significantly to the elastohydrodynamic (EHL) film thickness under the high load / slow speed conditions typical of large open gearing.
Mobilgear OGL 007, 009 and 461 are designed for the lubrication of large, slow to medium speed, heavily loaded gears in heavy-duty applications.Mobilgear OGL 007 and 009 are conveniently applied by spray on gear teeth.Mobilgear OGL 461 is also suitable to prime the surfaces of newly assembled open gears in order to provide lubrication during initial turning.The Mobilgear OGL Series is used in a wide variety of industrial sectors including
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
Mobilgear OGL 007, 009 and 461
Grease
Product Description
Features and Benefits
Features
Advantages and Potential Benefits
Special formulation provides outstanding load-carrying and anti-wear properties
Superior protection against wear and reduced gear replacement costs
Excellent pumpability and sprayability for the semi-fluid NLGI 00 grades
Efficient operation, good low temperature start-up and reduced energy consumption
Very good protection against rust and corrosion
Longer equipment life, reduced downtime and reduced maintenance costs
Very good adhesive nature of the product
Reduced fling-off, consumption and lower lubricant costs
Absence of lead, nitrite and solvent
Reduced impact on the environment
Applications
Typical Properties
Mobilgear OGL
007
009
461
NLGI Grade
00 - 0
00 - 0
1.5
Colour, Visual
Black
Black
Black
Penetration, Worked, 25°C, ASTM D 217, mm/10
405
405
305
Dropping Point, °C, ASTM D 2265
200
200
200
Viscosity of Oil, ASTM D 445
cSt @ 40°C
460
1500
460
FZG Gear Test, DIN 51354, A/2.76/50 Fail Stage
12+
12+
Not Applicable
Wear, mg/kWh
0.25
0.25
Not Applicable
4-Ball Wear, ASTM D 2266, Scar, mm
0.5
0.5
0.6
4-Ball Weld Test, ASTM D 2596, weld load, kg
800
800
800
Corrosion Protection, ASTM D 1743
Pass
Pass
Pass
Health and Safety
粵公網安備 44030602003087號